Repository logo
HARVEST

Browsing by Author "Wilson, Lee"

Now showing 1 - 3 of 3
  • Thumbnail Image
    Item
    A Highly Sensitive Chitosan-Based SERS Sensor for the Trace Detection of a Model Cationic Dye
    (MDPI, 2024-08-28) Vafakish, Bahareh; Wilson, Lee
    The rapid detection of contaminants in water resources is vital for safeguarding the environment, where the use of eco-friendly materials for water monitoring technologies has become increasingly prioritized. In this context, the role of biocomposites in the development of a SERS sensor is reported in this study. Grafted chitosan was employed as a matrix support for Ag nanoparticles (NPs) for the surface-enhanced Raman spectroscopy (SERS). Chitosan (CS) was decorated with thiol and carboxylic acid groups by incorporating S-acetyl mercaptosuccinic anhydride (SAMSA) to yield CS-SAMSA. Then, Ag NPs were immobilized onto the CS-SAMSA (Ag@CS-SAMSA) and characterized by spectral methods (IR, Raman, NIR, solid state 13C NMR with CP-MAS, XPS, and TEM). Ag@CS-SAMSA was evaluated as a substrate for SERS, where methylene blue (MB) was used as a model dye adsorbate. The Ag@CS-SAMSA sensor demonstrated a high sensitivity (with an enhancement factor ca. 108) and reusability over three cycles, with acceptable reproducibility and storage stability. The Raman imaging revealed a large SERS effect, whereas the MB detection varied from 1–100 μM. The limits of detection (LOD) and quantitation (LOQ) of the biocomposite sensor were characterized, revealing properties that rival current state-of-the-art systems. The dye adsorption profiles were studied via SERS by fitting the isotherm results with the Hill model to yield the ΔG°ads for the adsorption process. This research demonstrates a sustainable dual-function biocomposite with tailored adsorption and sensing properties suitable for potential utility in advanced water treatment technology and environmental monitoring applications.
  • Thumbnail Image
    Item
    Aloe vera mucilage as a sustainable biopolymer flocculant for efficient arsenate anion removal from water
    (The Royal Society of Chemistry, 2024-07-24) Venegas-García, Deysi J.; Wilson, Lee; De la Cruz Guzmán , Paola Mayela
    In recent years, utilization of biopolymers as natural coagulant–flocculant (CF) systems has become an area of interest, due to their sustainable nature (renewable, biodegradable, and non-toxic) and potential utility as alternative systems to replace synthetic flocculants. Herein, a biopolymer extracted from Aloe vera mucilage (AVM) was investigated for its arsenic(V) removal properties in a CF water treatment process. Structural characterization of AVM was supported by spectroscopy (FTIR, 13C solids NMR & XPS), TGA, rheology, and pHpzc. The arsenic(V) removal process was optimized by employing the Box–Behnken design under three main factors (coagulant, flocculant dosage and initial arsenic(V) concentration), which led to a reduction of the initial arsenic(V) concentration to levels below the Maximum Acceptable Concentration (MAC; 10 μg L−1). The kinetics and thermodynamics of arsenic(V) removal were analyzed with a one-pot in situ method, where the kinetic profiles followed a pseudo-first-order model. The thermodynamic parameters are characteristic of a spontaneous (entropy-driven) and endothermic physisorption removal process. Flocs isolated from the process were analyzed by XPS, where the results reveal that calcium and amide groups of AVM contribute to the arsenic(V) removal mechanism.
  • Thumbnail Image
    Item
    Fenton-Based Treatment of Flax Biomass for Modification of Its Fiber Structure and Physicochemical Properties
    (MDPI, 2024-07-15) Aliasgharlou, Nasrin; Cree, Duncan E.; Wilson, Lee
    The availability of a sustainable technique for degumming lignocellulose fibers is a challenge for the fiber processing industry. Removal of non-cellulosic content from lignocellulose fibers is essential for improving their mechanical and chemical properties, which makes the fibers more suitable for various applications. Herein, a catalytic Fenton-based oxidation process was employed to isolate microcellulose fibers from raw flax fibers. Various complementary methods such as FT-IR/NMR spectroscopy and TGA were used to obtain insight into the thermal behavior of the treated fibers. The morphology of the fibers was studied using Scanning Electron Microscopy (SEM), whereas the surface chemical properties of the fibers was evaluated by a dye-based adsorption method, along with a potentiometric point-of-zero-charge method. To obtain fibers with suitable properties, such as uniform fiber diameter, several Fenton reaction parameters were optimized: pH (7), reaction time (15 h), iron sulfate (2 wt.%), and hydrogen peroxide (10 wt.%). The results indicate that, under the specified conditions, the average diameter of the raw fibers (12.3 ± 0.5 µm) was reduced by 58%, resulting in an average diameter of 5.2 ± 0.3 µm for the treated fibers. We demonstrate that the treated fibers had a lower dye adsorption capacity for methylene blue, consistent with the smoother surface features of the treated fibers over the raw flax fibers. Overall, this study contributes to utilization of the Fenton reaction an efficient oxidation technique for the production of lignocellulose fibers with improved physicochemical properties, such as reduced fiber diameter distribution, in contrast with traditional alkali-based chemical treatment.