Show simple item record

dc.contributor.advisorBillinton, R.
dc.contributor.advisorChowdhury, N. A.
dc.creatorGupta, Rajnish
dc.date.accessioned2018-12-11T17:20:51Z
dc.date.available2018-12-11T17:20:51Z
dc.date.issued1991-06
dc.date.submittedJune 1991en_US
dc.identifier.urihttp://hdl.handle.net/10388/11631
dc.description.abstractAn electric power system as a whole is an enormous entity. It is very difficult to evaluate the reliability of a complete power system on this basis. It has been, therefore, divided into the three functional zones of generation, transmission and distribution. The distribution functional zone can be further subdivided into subtransmission and radial parts. This thesis pertains to the analysis of an electric subtransmission system. An analysis of a subtransmission system involves the identification of the individual component failure modes based on which load point failure events and restoration modes are assessed. Component permanent, maintenance and temporary failure modes are considered in the reliability predictions. In addition active failures and adverse weather effects have also been considered. A digital computer program `SUBTREL' which takes into consideration most of the factors affecting the adequacy of a subtransmission system and which is highly user friendly is presented in this thesis. The RBTS subtransmission system, which is sufficiently large that practical factors can be realistically modelled and assessed yet sufficiently small that the effect of sensitivity studies can be easily identified, is utilized as the test system for studies described in this thesis. The radial part of the RBTS distribution system is described briefly and analysis of the radial distribution segment is done by making use of the computer program 'DISREL'. Some sensitivity studies are also performed on the RBTS distribution system by making use of the above mentioned computer programs. Finally a comparison of the subtransmission system and the radial distribution system, with regard to their reliability indices, is made.en_US
dc.titleRELIABILITY EVALUATION OF SUBTRANSMISSION CONFIGURATIONS IN ELECTRIC POWER SYSTEMSen_US
thesis.degree.departmentElectrical and Computer Engineeringen_US
thesis.degree.disciplineElectrical Engineeringen_US
thesis.degree.grantorUniversity of Saskatchewanen_US
thesis.degree.levelMastersen_US
thesis.degree.nameMaster of Science (M.Sc.)en_US
dc.type.genreThesisen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record