Repository logo
 

Performance analysis of wireless relay systems

Date

2010-05

Journal Title

Journal ISSN

Volume Title

Publisher

ORCID

Type

Degree Level

Doctoral

Abstract

There has been phenomenal interest in applying space-time coding techniques in wireless communications in the last two decades. In general, the benefit of applying space-time codes in multiple-input, multiple-output (MIMO) wireless channels is an increase in transmission reliability or system throughput (capacity). However, such a benefit cannot be obtained in some wireless systems where size or other constraints preclude the use of multiple antennas. As such, wireless relay communications has recently been proposed as a means to provide spatial diversity in the face of this limitation. In this approach, some users or relay nodes assist the transmission of other users’ information. This dissertation contributes to the advancement of wireless relay communications by investigating the performance of various relaying signal processing methods under different practical fading environments. In particular, it examines two main relaying methods, namely decode-and-forward (DF) and amplify-and-forward (AF). For DF, the focus is on the diversity analysis of relaying systems under various practical protocols when detection error at relays is taken into account. In order to effectively mitigate the phenomenon of error propagation, the smart relaying technique proposed by Wang et al. in [R1] is adopted. First, diversity analysis of a single-relay system under the scenario that only the relay is allowed to transmit in the second time slot (called Protocol II) is carried out. For Nakagami and Hoyt generalized fading channels, analytical and numerical results are provided to demonstrate that the system always obtains the maximal diversity when binary phase shift keying (BPSK) modulation is used. Second, a novel and low-complexity relaying system is proposed when smart relaying and equal gain combing (EGC) techniques are combined. In the proposed system, the destination requires only the phases of the channel state information in order to detect the transmitted signals. For the single-relay system with M-ary PSK modulation, it is shown that the system can achieve the maximal diversity under Nakagami and Hoyt fading channels. For the K-relay system, simulation results suggest that the maximal diversity can also be achieved. Finally, the diversity analysis for a smart relaying system under the scenario when both the source and relay are permitted to transmit in the second time slot (referred to as Protocol I) is presented. It is shown that Protocol I can achieve the same diversity order as Protocol II for the case of 1 relay. In addition, the diversity is very robust to the quality of the feedback channel as well as the accuracy of the quantization of the power scaling implemented at the relay. For AF, the dissertation considers a fixed-gain multiple-relay system with maximal ratio combining (MRC) detection at the destination under Nakagami fading channels. Different from the smart relaying for DF, all the channel state information is assumed to be available at the destination in order to perform MRC for any number of antennas. Upperbound and lowerbound on the system performance are then derived. Based on the bounds, it is shown that the system can achieve the maximal diversity. Furthermore, the tightness of the upperbound is demonstrated via simulation results. With only the statistics of all the channels available at the destination, a novel power allocation (PA) is then proposed. The proposed PA shows significant performance gain over the conventional equal PA.

Description

Keywords

equal gain combining, performance analysis, diversity order, adaptive transmission, decode–and–forward, Hoyt fading, amplify-and-forward, cooperative communications, Nakagami fading, smart relaying, relaying communications, maximal ratio combining, power allocation

Citation

Degree

Doctor of Philosophy (Ph.D.)

Department

Electrical Engineering

Program

Electrical Engineering

Citation

Part Of

item.page.relation.ispartofseries

DOI

item.page.identifier.pmid

item.page.identifier.pmcid