Biosorption of nickel by barley straw
MetadataShow full item record
Nickel contaminated wastewater from plating industries is a major environmental concern. Current treatment methods are often expensive and can also create additional problems. Biosorption is an alternative treatment method that uses inexpensive biomaterials to sequester metals from aqueous solutions. In this study, acid washed barley straw (AWBS) was used for adsorbing nickel ions (Ni2+) from simulated nickel plating wastewater. The adsorption process was rapid and the equilibrium was reached in about an hour. An increase in the initial nickel concentration increased the equilibrium nickel uptake, and the maximum uptake was found to be 8.45 mg/g of AWBS when the initial nickel concentration was1000 mg/L at pH 5. Nickel adsorption was favorable at room temperature than 5oC and 40oC, better adsorption rate and equilibrium uptake was observed at 23oC. Increasing the pH from 3 to 7 increased the equilibrium nickel uptake and the maximum uptake was observed at pH 7, whilst the initial nickel ion concentration was 100 mg/L. The Freundlich isotherm model exhibited better fit with the equilibrium data than the Langmuir equation. Nickel was desorbed using hydrochloric acid solution at pH 2 and the desorption efficiency was 86%. FT-IR studies indicated the participation of hydroxyl, carboxyl and amide groups from cellulose, hemi-cellulose, protein and lignin of barley straw.
DegreeMaster of Science (M.Sc.)
SupervisorNiu, Hui (Catherine)
CommitteeWilson, Lee D.; Nemati, Mehdi; Hill, Gordon
Copyright DateSeptember 2009