Control of a hydraulically actuated mechanism using a proportional valve and a linearizing feedforward controller
Date
2004-08-19
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
ORCID
Type
Degree Level
Doctoral
Abstract
A common problem encountered in mobile hydraulics is the desire to automate motion control functions in a restricted-cost and restricted-sensor environment. In this thesis a solution to this problem is presented. A velocity control scheme based on a novel single component pressure compensated ow controller was developed and evaluated. The development of the controller involved solving several distinct technical challenges. First, a model reference control scheme was developed to provide control of the valve spool displacement for a particular electrohydraulic proportional valve. The control scheme had the effect of desensitizing the transient behaviour of the valve dynamics to changes in operating condition. Next, the pressure/flow relationship of the same valve was examined. A general approach for the mathematical characterization of this relationship was developed. This method was based on a modification of the so-called turbulent orifice equation. The general approach included a self-tuning algorithm. Next, the modified turbulent orifice equation was applied in conjunction with the model reference valve controller to create a single component pressure compensated flow control device. This required an inverse solution to the modified orifice equation. Finally, the kinematics of a specific single link hydraulically actuated mechanism were solved. Integration of the kinematic solution with the flow control device allowed for predictive velocity control of the single link mechanism.
Description
Keywords
predictive control, off-highway equipment, hydraulics
Citation
Degree
Doctor of Philosophy (Ph.D.)
Department
Mechanical Engineering
Program
Mechanical Engineering