Repository logo
HARVEST

College of Arts and Science

Permanent URI for this community

https://hdl.handle.net/10388/7737

Browse

Browsing College of Arts and Science by Subject "adsorption"

Now showing 1 - 4 of 4
  • Thumbnail Image
    Item
    Adsorption of (Poly)vanadate onto Ferrihydrite and Hematite: An In Situ ATR–FTIR Study
    (American Chemical Society (ACS) Publications, 2020-03-25) Vessey, Colton; Schmidt, Michael P.; Abdolahnezhad, Mojtaba; Peak, Derek; Lindsay, Matthew B. J.
    Vanadium (V) has been a useful trace metal in describing Earth’s biogeochemical cycling and development of industrial processes; however, V has recently been recognized as a potential contaminant of concern. Although Fe (oxyhydr)oxides are important sinks for aqueous V in soils and sediments, our understanding of adsorption mechanisms is currently limited to mononuclear species (i.e., HxVO4(3–x)–). Here we use in situ attenuated total reflectance – Fourier transform infrared spectroscopy to examine sorption mechanisms and capacity for (poly)vanadate attenuation by ferrihydrite and hematite from pH 3 to 6. Adsorption isotherms illustrate the low affinity of polyvanadate species for ferrihydrite surfaces compared to hematite. Mononuclear V species (i.e., [HxVO4](3−x)− and VO2+) were present at all experimental conditions. At low surface loadings and pH 5 and 6, H2VO4− adsorption onto ferrihydrite and hematite surfaces results from formation of inner sphere complexes. At [V]T above 250 µM, adsorbed polynuclear V species in this study include H2V2O72− and V4O124−. Whereas, HV10O286−, H3V10O285−, and NaHV10O284− are the predominant adsorbed species at pH 3 and 4 and elevated [V]T. Surface polymers were identified on hematite at all experimental pH values, whereas polymeric adsorption onto ferrihydrite was limited to pH 3 and 4. These results suggest that hematite offers a more suitable substrate for polymer complexation compared to ferrihydrite. Our results demonstrate the pH and concentration dependant removal of (poly)vanadate species by Fe(III) (oxyhydr)oxides, which has implications for understanding V mobility, behaviour, and fate in the environment.
  • Thumbnail Image
    Item
    Coal-Based Activated Carbon via Microwave-Assisted ZnCl2 Activation for Methyl Violet 2B Dye Removal: Optimization, Desirability Function, and Adsorption Mechanism
    (MDPI, 2023) Musa, Salis A.; Abdulhameed, Ahmed Saud; Baharin, Siti Nor Atika ; ALOthman, Zeid; Wilson, Lee; Jawad, Ali H.
    In this work, activated carbon (referred to as MCAC) was produced by microwave radiation assisted ZnCl2 activation using Malaysian coal (MC) as a precursor. The Brunauer–Emmett–Teller findings indicate that the MCAC has a relatively large surface area (798.18 m2/g) and a mesoporous structure (average pore diameter of 3.67 nm). The removal of Methylene Violet (MV 2B) a cationic dye model, was employed to investigate the adsorption properties of MCAC. A numerical desirability function in the Box–Behnken design (BBD) was employed to optimize the independent crucial adsorption variables as follows: A: MCAC dose (0.02–0.1 g); B: pH (4–10); and C: time (5–25 min). The results of equilibrium and dynamic adsorption showed that the adsorption of MV 2B followed Freundlich and pseudo-second order models, respectively. The maximum amount of MV 2B dye that the MCAC could adsorb (qmax) was 134.1 mg/g. Electrostatic interactions, π-π stacking, H-bonding, and pore diffusion contribute to the adsorption of MV 2B dye onto the MCAC surface. This study demonstrates the potential to utilize MC as a low-cost precursor for the efficient synthesis of MAC and its utility for the removal of pollutants.
  • Thumbnail Image
    Item
    A Fixed-Bed Column with an Agro-Waste Biomass Composite for Controlled Separation of Sulfate from Aqueous Media
    (MDPI, 2023) Solgi, Mostafa; Steiger, Bernd; Wilson, Lee
    An agro-waste composite with a pelletized form was prepared and characterized via IR and 13C solids NMR spectroscopy. Thermal gravimetry analysis (TGA) was used to study the weight loss profiles, while SEM images provided insight on the biocomposite morphology, along with characterization of the sulfate adsorption properties under equilibrium and dynamic conditions. The sulfate monolayer adsorption capacity (qe = 23 mg/g) of the prepared agro-waste pellets was estimated from the adsorption isotherm results by employing the Langmuir model, and comparable fitting results were obtained by the Freundlich model. The dynamic adsorption properties were investigated via adsorption studies with a fixed bed column at pH 5.2. The effects of various parameters, including flow rate, bed height and initial concentrations of sulfate, were evaluated to estimate the optimal conditions for the separation of sulfate. The experimental data of the breakthrough curves were analyzed using the Thomas and Yoon–Nelson models, which provided satisfactory best-fits for the fixed bed kinetic adsorption results. The predicted adsorption capacities for all samples according to the Thomas model concur with the experimental values. The optimum conditions reported herein afford the highest dynamic adsorption capacity (30 mg/g) as follows: 1100 mg/L initial sulfate concentration, 30 cm bed height and 5 mL/min flow rate. The breakthrough time was measured to be 550 min. This study contributes to a strategy for controlled separation of sulfate using a sustainable biocomposite material that is suitable for fixed-bed column point-of-use water treatment systems.
  • Thumbnail Image
    Item
    A pyridinium-modified chitosan-based adsorbent for arsenic removal via a coagulation-like methodology
    (Royal Society of Chemistry, 2023) Venegas-García, Deysi J.; Steiger, Bernd; Wilson, Lee
    The goal of this study was to synthesize a chitosan-derived adsorbent that can be used in a coagulation– flocculation (CF) process for facile integration into existing water treatment processes. Therefore, an insoluble pyridinium-modified chitosan (Chi-Py) was prepared. Structural characterization was achieved with spectroscopy (FT-IR, 13C solids NMR, and X-ray photoelectron) methods and thermogravimetric analysis. Approximately 7% di-nitrobenzene and ca. 30% pyridinium moieties were incorporated into the chitosan framework via an adapted, moderate-temperature, Zincke reaction. The arsenic removal efficiency was evaluated by a coagulation-inspired methodology at pH 7.5, where the results were compared against CF systems such as pristine chitosan, FeCl3 and chitosan–FeCl3. The kinetic and van't Hoff thermodynamic parameters for arsenic removal were calculated. Arsenic adsorption was shown to be a spontaneous and exothermic process (ΔG = −4.7 kJ mol−1; ΔH = −75.6 kJ mol−1) with a 76% arsenic removal efficiency at 23 °C and 96% at 5 °C with a maximum effective adsorbent dosage of Chi- Py of 300 mg L−1. The adsorption process for Chi-Py followed pseudo-first order kinetics, where the pyridinium-modified chitosan adsorbent can be successfully employed similar to coagulant-like systems in conventional water treatment processes. In contrast to conventional adsorbents (1–2 g L−1), a dosage of only 300 mg L−1 was required for Chi-Py that offers greater sustainability and recycling of materials. This is contrasted with single-use conventional coagulants such as FeCl3 or binary FeCl3–chitosan CF systems.