An adjustable-ratio flow dividing hydraulic valve
Wiens, Travis Kent
MetadataShow full item record
This thesis proposes a new type of hydraulic valve: an adjustable-ratio flow divider. This valve attempts to split one input flow into two output flows in a predetermined ratio, independent of load pressure or total flow. The valve uses a two dimensional structure to form a two-stage valve with only one moving part; the pilot stage uses the spool s rotary position, and the main stage uses its linear position. This arrangement allows for a cheaper, simpler valve with smaller volumes (translating into faster response). The ratio of outlet flows can be set on the fly by the angular position of the spool, driven by a stepper motor or other low-power input. In order to evaluate the initial feasibility of the concept, steady state and dynamic models were developed and the effects of the physical parameters were studied. Two non-linear non-derivative multiobjective optimization strategies were used to determine the optimum parameters for a prototype. Finally, the prototype s performance was experimentally examined and appears to work as expected.
DegreeMaster of Science (M.Sc.)
SupervisorBurton, Richard T.
CommitteeSumner, David; Schoenau, Greg J.; Roberge, Martin; Habibi, Saeid R.
Copyright DateAugust 2004