Repository logo

Optimized hardware implementations of cryptography algorithms for resource-constraint IoT devices and high-speed applications

dc.contributor.advisorKo, Seok-Bum
dc.contributor.committeeMemberDeters, Ralph
dc.contributor.committeeMemberChen, Li
dc.contributor.committeeMemberSaadat Mehr, Aryan
dc.contributor.committeeMemberMohamed, Ebrahim Bedeer
dc.creatorShahbazi, Karim 2022
dc.description.abstractThe advent of technologies, including the Internet and smartphones, has made people’s lives easier. Nowadays, people get used to digital applications for e-business, communicating with others, and sending or receiving sensitive messages. Sending secure data across the private network or the Internet is an open concern for every person. Cryptography plays an important role in privacy, security, and confidentiality against adversaries. Public-key cryptography (PKC) is one of the cryptography techniques that provides security over a large network, such as the Internet of Things (IoT). The classical PKCs, such as Elliptic Curve Cryptography (ECC) and Rivest-Shamir-Adleman (RSA), are based on the hardness of certain number theoretic problems. According to Shor’s algorithm, these algorithms can be solved very efficiently on a quantum computer, and cryptography algorithms will be insecure and weak as quantum computers increase in number. Based on NIST, Lattice-based cryptography (LBC) is one of the accepted quantum-resistant public-key cryptography. Different variants of LBC include Learning With Error (LWE), Ring Learning With Error (Ring-LWE), Binary Ring Learning with Error (Ring-Bin LWE), and etc. AES is also one of the secure cryptography algorithm that has been widely used in different applications and platforms. Also, AES-256 is secure against quantum attack. It is very important to design a crypto-system based on the need and application. In general, each network has three different layers; cloud, edge, and end-node. The cloud and edge layer require to have a high-speed crypto-system, as it is used in high-traffic application to encrypt and decrypt data. Unfortunately, most of the end-node devices are resource-constraint and do not have enough area for security guard. Providing end-to-end security is vital for every network. To mitigate this issue, designing and implementing a lightweight cryto-system for resource-constraint devices is necessary. In this thesis, a high-throughput FPGA implementation of AES algorithm for high-traffic edge applications is introduced. To achieve this goal, some part of the algorithm has been modified to balance the latency. Inner and outer pipelining techniques and loop-unrolling have been employed. The proposed high-speed implementation of AES achieves a throughput of 79.7Gbps, FPGA efficiency of 13.3 Mbps/slice, and frequency of 622.4MHz. Compared to the state-of-the-art work, the proposed design has improved data throughput by 8.02% and FPGA-Eff by 22.63%. Moreover, a lightweight architecture of AES for resource-constraint devices is designed and implemented on FPGA and ASIC. Each module of the architecture is specified in which occupied less area; and some units are shared among different phases. To reduce the power consumption clock gating technique is applied. Application-specific integrated circuit (ASIC) implementation results show a respective improvement in the area over the previous similar works from 35% to 2.4%. Based on the results and NIST report, the proposed design is a suitable crypto-system for tiny devices and can be supplied by low-power devices. Furthermore, two lightweight crypto-systems based on Binary Ring-LWE are presented for IoT end-node devices. For one of them, a novel column-based multiplication is introduced. To execute the column-based multiplication only one register is employed to store the intermediate results. The multiplication unit for the other Binary Ring-LWE design is optimized in which the multiplication is executed in less clock cycles. Moreover, to increase the security for end-node devices, the fault resiliency architecture has been designed and applied to the architecture of Binary Ring-LWE. Based on the implementation results and NIST report, the proposed Binary Ring-LWE designs is a suitable crypto-system form resource-constraint devices.
dc.subjectPost-Quantum Cryptagraphy, AES, Binary Ring-LWE, FPGA, Hardware implementation,
dc.titleOptimized hardware implementations of cryptography algorithms for resource-constraint IoT devices and high-speed applications
dc.type.materialtext and Computer Engineering Engineering of Saskatchewan of Philosophy (Ph.D.)


Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
4.41 MB
Adobe Portable Document Format
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
2.27 KB
Plain Text