A 0.18µm CMOS UWB wireless transceiver for medical sensing applications
| dc.contributor.advisor | Dinh, Anh van | en_US |
| dc.contributor.committeeMember | Khan, Wahid A. | en_US |
| dc.contributor.committeeMember | Hsiang-Yung, Teng | en_US |
| dc.contributor.committeeMember | Chen, Li | en_US |
| dc.contributor.committeeMember | Yang, Shi | en_US |
| dc.creator | Wang, Xubo | en_US |
| dc.date.accessioned | 2008-08-28T12:49:08Z | en_US |
| dc.date.accessioned | 2013-01-04T04:55:29Z | |
| dc.date.available | 2009-09-03T08:00:00Z | en_US |
| dc.date.available | 2013-01-04T04:55:29Z | |
| dc.date.created | 2008 | en_US |
| dc.date.issued | 2008 | en_US |
| dc.date.submitted | 2008 | en_US |
| dc.description.abstract | Recently, there is a new trend of demand of a biomedical device that can continuously monitor patient’s vital life index such as heart rate variability (HRV) and respiration rate. This desired device would be compact, wearable, wireless, networkable and low-power to enable proactive home monitoring of vital signs. This device should have a radar sensor portion and a wireless communication link all integrated in one small set. The promising technology that can satisfy these requirements is the impulse radio based Ultra-wideband (IR-UWB) technology. Since Federal Communications Commission (FCC) released the 3.1GHz-10.6GHz frequency band for UWB applications in 2002 [1], IR-UWB has received significant attention for applications in target positioning and wireless communications. IR-UWB employs extremely narrow Gaussian monocycle pulses or any other forms of short RF pulses to represent information. In this project, an integrated wireless UWB transceiver for the 3.1GHz-10.6GHz IR-UWB medical sensor was developed in the 0.18µm CMOS technology. This UWB transceiver can be employed for both radar sensing and communication purposes. The transceiver applies the On-Off Keying (OOK) modulation scheme to transmit short Gaussian pulse signals. The transmitter output power level is adjustable. The fully integrated UWB transceiver occupies a core area of 0.752mm^2 and the total die area of 1.274mm^2 with the pad ring inserted. The transceiver was simulated with overall power consumption of 40mW for radar sensing. The receiver is very sensitive to weak signals with a sensitivity of -73.01dBm. The average power of a single pulse is 9.8µW. The pulses are not posing any harm to human tissues. The sensing resolution and the target positioning precision are presumably sufficient for heart movement detection purpose in medical applications. This transceiver can also be used for high speed wireless data communications. The data transmission rate of 200 Mbps was achieved with an overall power consumption of 57mW. A combination of sensing and communications can be used to build a low power sensor. | en_US |
| dc.identifier.uri | http://hdl.handle.net/10388/etd-08282008-124908 | en_US |
| dc.language.iso | en_US | en_US |
| dc.subject | UWB | en_US |
| dc.subject | transceiver | en_US |
| dc.subject | IC | en_US |
| dc.title | A 0.18µm CMOS UWB wireless transceiver for medical sensing applications | en_US |
| dc.type.genre | Thesis | en_US |
| dc.type.material | text | en_US |
| thesis.degree.department | Electrical Engineering | en_US |
| thesis.degree.discipline | Electrical Engineering | en_US |
| thesis.degree.grantor | University of Saskatchewan | en_US |
| thesis.degree.level | Masters | en_US |
| thesis.degree.name | Master of Science (M.Sc.) | en_US |